You just bought your first mechanical watch. On the contrary, you already have your own small collection – it’s not important. Both beginners and experienced owners will not be prevented from knowing about some difficulties of “communication” with this accessory. We decided to remind you of three important rules that will help to extend the life of your mechanical watch. Because of the prevention of failures, as a rule, is much cheaper than the repair itself.

Mechanical Watch and Water

“Mechanics” is known for its capriciousness. The handling of such a watch should be very delicate, they should be protected from a lot of things. One of the vilest enemies of mechanical watches is water. Under no conditions should you minimize the water and overestimate the capabilities of your watch. Even if they belong to a special cast of accessories that have passed all the necessary tests for compliance with the ISO 6425 standard.

Mechanical Watch
Mechanical Watch and Water

Seals, protecting the watch from the penetration of water into the joints of the case. It may eventually become covered with micro cracks. This applies to all hours. Usually, microcracks appear after the owner has exceeded the permissible limit of immersion – went to a depth at which the clock held not calculated. Such minor damage, of course, will not be visible to the eye, and the mechanical watch will continue to function properly.

You may like also: All you need to know about the military watch and Its facts

However, over time, under the influence of various factors, micro cracks will increase, and once a normal shower with a watch on the wrist can turn into a breakdown. Marine or chlorinated water, including particles of detergent, can become a nightmare for a caliber whose water protection system is damaged.

Mechanical Watch
Mechanical Watch Facts

In addition, the mechanical watch should keep away from the thermal bath or bath because of the different thermal conductivity and coefficient of thermal expansion of materials. So, if the watch case made of metal, then in conditions of high temperatures the expansion of this material will occur faster than that of the dial glass. As a result, gaps may appear between the parts, sufficient to penetrate the moisture. Treat your watch carefully, do not subject them to tests that go beyond their capabilities.

Mechanical clock and maintenance

Technical inspection is an obligatory procedure not only for cars but also for watches. The mechanical watch requires systematic cleaning and lubrication. It is better for the qualified specialist to entrust. Opinions about the frequency of technical inspection are very diverse. Some owners bring their watches to masters every two years. Others – every five to six years. We recommend choosing the golden mean – show your “mechanic” watchmaker once every three years. The main thing is not to delay!

Mechanical Watch

Movement is life

A feature of mechanical watches is the need to carry out the daily winding of the mechanism. The exception to this rule is only a watch with a self-winding function. Do it better at the same time, for example – in the morning. Do not apply too much force at a manual plant – relieve pressure on the crown, as soon as the fingers feel resistance when tightening.

The manual plant of mechanical watches is important to produce only with the clock removed from the wrist. So, the pressure of the hand is distributed evenly. In case you wear a mechanical watch irregularly, it is not necessary to start them daily. So, as not to wear out the mechanism, once a month will be enough.

Leave a Reply

Your email address will not be published. Required fields are marked *